DPC0.S08 VALVE SERIES

Hybrid SAE08 Cartridge - 420 bar

Direct acting check valve

Pilot piston to open

DESCRIPTION

Normally closed, dual pilot check valve. Cartridge is closed until sufficient pressure is applied on port 1 to reach the bias spring

setting, lift the poppet and allow free flow to port 2 . The valve is normally closed from port 2 to 1. When sufficient pressure is

applied on Pilot Port , the pilot piston lifts the poppet from its seat and allows flow from port 2 to port 1 (Pil A = 1B. Pil B = 1A). Very

limited leakage in the check condition.

The performance chart illustrates flow

handling capacity for significant spring

options.

p/Q curves are recorded at TOil = 40°C

and 46 cSt.

TECHNICAL DATA

MAXIMUM INTERNAL LEAKAGE

0,10 cm

3

0,10 cm

420 bar

0,127 kg

SK.046 (standard sealing NBR-BUNA-N)

OIL TESTING CONDITIONS

ISO VG 46 cSt

TECH. SPEC. FOR CHARACTERIZATION

see page 689

VISCOSITIES

7,4 to 420 cSt

FLUIDS

Mineral - based or synthetics with lubricating properties

OIL TEMPERATURE RANGE

-30° C to 110° C

O-RING TEMPERATURE RANGE

-30° C to 110° C (standard sealing NBR - BUNA - N)

-35° C to 140° C (HNBR - Upon customer request)

-23° C to 225° C (FKM - Upon customer request)

Valve basic code

3/4-16 UNF with Ø12,7 nose size

Size

Marking

0 = Standard factory marking.

Customized marking can be done

upon request.

000 = Standard configuration.

Spring model

code

(bar)

I 7,0

Spring model

0 = Standard configuration

4 = Without O-Ring on the pilot

piston

PILOT Check Valves